Differences Between Inmode and Onda: Criteria for Managing Fat When the Jawline Appears Dull
2026-08-12
The reasons for a dull jawline vary depending on the depth and elasticity of the skin rather than just the amount of fat itself.
Inmode uses radiofrequency + ultrasound to target both fat and elasticity, while Onda uses microwave technology to selectively target fat layers.
If the presence of fat is prominent, Inmode FX or Onda may be considered; if the cause is loss of elasticity, Inmode FORMA series should be prioritized.
Hello, this is Derna Clinic.
Many people are looking into lifting procedures due to concerns that their jawline appears less defined than before or that their face looks dull due to deep cheek fat. The most commonly compared treatments at this time are Inmode and Onda lifting.
However, it is difficult to simply compare the differences between Inmode and Onda based on which treatment is better. The two devices use different energy sources and methods of action, and the appropriate choice may vary depending on the distribution of facial fat and the condition of skin elasticity.
Today, I will explain the differences between Inmode and Onda lifting, and in what cases each can be considered in detail.
What Causes a Dull Jawline?
When looking in the mirror and feeling that the jawline is not the same as before, most people tend to think, "Have I gained weight?" However, the actual influence often comes from the position of fat and the elasticity of the skin.
Common reasons for a blurred facial line include:
✔️ Subcutaneous fat located just beneath the skin
✔️ Facial fat located in relatively deeper layers, such as the deep cheek fat
✔️ Decreased skin elasticity causing tissue to sag
✔️ When both fat and loss of elasticity occur simultaneously
As such, the causes that make the facial line appear blurred can vary from person to person.
Even if it looks like a double chin, the reasons differ for each individual, so the process of accurately diagnosing the current facial condition should come before deciding which device to choose.
Quick Comparison: Inmode vs Onda Lifting
Both treatments are non-invasive lifting devices, but there are differences in the energy used and the method of action.
Category | Inmode | Onda Lifting |
|---|---|---|
Energy Used | Radiofrequency (RF) | Microwave |
Main Features | Considers both fat layers and skin elasticity | Delivers thermal energy selectively to fat and dermal layers |
Consideration Target | Double chin, jawline, elasticity concerns | Deep cheek fat, facial volume, natural contouring |
Treatment Features | Modes can be selected and applied based on the situation | Designed with a cooling system to reduce treatment discomfort |
In other words, the key difference between Inmode and Onda is not which device is superior, but rather the approach that matches the cause of the facial concerns.
When Might Inmode Be More Suitable?
Inmode is a lifting device that can consider both fat and skin elasticity. It can be considered as one option during the consultation process in the following cases:
✔️ If you are concerned about double chin or fat under the jaw
✔️ If you want to improve skin elasticity along with the jawline
✔️ If your lower face feels heavy and your facial line appears dull
✔️ If you want to manage both fat and elasticity together
In particular, modes such as FX and FORMA can be applied according to the condition of the face, allowing for a personalized approach.
If you are curious about how to choose between Inmode FX and FORMA, please check the column below.
👩🏻⚕️How to Choose Gangnam Inmode FX FORMA | Summary of Effects and Precautions Before and After
When Is Onda Lifting More Suitable?
Onda lifting is a lifting device that utilizes microwave energy, delivering thermal energy selectively to fat and dermal layers. It is often considered in the following cases:
✔️ If your face looks larger due to deep cheek fat
✔️ If you want to naturally contour your facial line
✔️ If you are concerned about excessively reducing facial volume
✔️ If you want to reduce the burden of daily life after treatment
However, these criteria are general examples, and the actual application may vary depending on individual skin conditions and fat distribution.
Summary of Recommendations for Inmode vs Onda
If you have the following concerns, you may consider Inmode or Onda:
✅ If you are worried about double chin → Inmode FX
✅ If you want to manage both jawline and skin elasticity → Inmode (can be combined with FORMA)
✅ If you are concerned about deep cheek fat → Onda Lifting
✅ If you want to naturally contour your facial line → Onda Lifting
✅ If you are more concerned about skin sagging than fat → prioritize elasticity-focused lifting
However, these are general guidelines for understanding, and it is recommended that the actual treatment plan be determined through diagnosis with a medical professional.
Frequently Asked Questions
Q. What is the average treatment cost for Inmode and Onda lifting?
Inmode pricing is based on treatment time, while Onda lifting pricing is based on the number of sessions. Derna Clinic offers various benefits for Inmode and Onda lifting. If you want to know the exact price, please check the link below.
🔎Go to check Inmode and Onda lifting event
※ Events may change or end without notice. If you cannot find what you are looking for, we will provide detailed guidance upon inquiry.
Q. Which is more advantageous for not interfering with work or daily life, Inmode or Onda?
Inmode FX uses suction to deliver energy, which may cause bruising similar to cupping marks that can last from a few days to 1-2 weeks for some individuals. In contrast, Onda lifting uses a cooling system to reduce epidermal heat, allowing for washing and makeup application immediately after treatment.
Q. If I am very sensitive to pain, is there a significant difference in treatment pain between Inmode and Onda lifting?
Some individuals may feel relatively more pain during the suction process of Inmode FX due to pulling or lumping sensations, while FORMA mode tends to have minimal pain. Onda lifting, using microwave and cooling wave technology, is often felt as warm heat, resulting in less pain during treatment.
Q. If I have a normal weight but a particularly prominent double chin, which should I prioritize, Inmode or Onda?
Regardless of weight, if fat under the jaw is distinctly noticeable, it is advisable to focus on reducing fat cells. Both Inmode FX and Onda lifting are utilized for this purpose. However, even with a double chin, the approach may differ depending on whether the fat layer is thick or if it appears sagging due to loss of elasticity, so it is necessary to first check the depth and amount of fat.
Q. Can receiving Inmode or Onda lead to hollowness in the cheeks for thin or peanut-shaped faces?
If a fat-reducing mode is excessively applied to areas where fat should be maintained, hollowness or sinking may occur. This is particularly risky for face shapes with less cheek fat, as excessive heat delivered to the fat layer can lead to adhesion between the skin and fascia layers, resulting in hollowness. In such cases, it is safer to design the treatment focusing on improving elasticity rather than reducing fat.
Q. How many sessions of Inmode or Onda lifting are typically needed for effectiveness, and how long does the maintenance period last?
Both treatments begin to show effects gradually from 2-4 weeks after a single session, with Inmode generally recommended for 3 sessions at 2-4 week intervals, and Onda lifting for 2-3 sessions at 4-6 week intervals. The maintenance period is approximately 6 months to 1.5 years for Inmode and about 6 months to 1 year for Onda lifting. However, the maintenance period may vary depending on individual fat conditions and lifestyle management habits.
Q. Is it okay to receive Inmode and Onda lifting on the same day or in a short interval?
Since both treatments use thermal energy, performing them together on the same day may increase the risk of swelling, bruising, and burns due to overlapping thermal stimulation on the skin. Therefore, it is recommended to perform one treatment at a time and wait 2 weeks to 1 month to assess recovery before proceeding with the next treatment.
Q. Can I receive contour injections or fat-dissolving injections along with lifting to maximize the effect on the jawline?
Contour injections are intended to help break down and eliminate fat, and when performed alongside lifting procedures that reduce fat cells, a complementary effect can be expected.
Q. Will Inmode and Onda be effective for men with thick jaw fat or for skin sagging in their 40s and 50s?
Men often have higher sebum production and thicker skin and fat layers, which may require slightly higher energy settings than women. In their 40s and 50s, individuals often experience loss of elasticity, leading to a greater emphasis on improving elasticity rather than reducing fat. Thus, even the same treatment may vary in approach and settings based on gender, age, and skin/fat conditions. Therefore, personalized design through precise individual diagnosis is crucial.
The Difference Between Inmode and Onda: Choosing the Right Option for You is Important
The difference between Inmode and Onda is not simply about comparing devices; it starts with accurately identifying the causes of your current facial concerns. Depending on whether it is a double chin, deep cheek fat, or loss of skin elasticity, the appropriate approach may vary. It is not just about reducing fat or improving elasticity; a customized diagnosis that considers the overall balance and contour of the face can lead to satisfying results.
If your jawline appears less defined than before or if you have concerns about your facial line, it is advisable to consult and receive a lifting plan that matches your current skin and fat condition rather than choosing a device on your own.
10AM - 10PM EVERYDAY
SKIN. LOVE. LIFE
DERNA